Dieses Bild zeigt Damian Vogt

Damian Vogt

Herr Prof. Tekn. Dr.

Prodekan/Studiendekan, Institutsdirektor
ITSM - Institut für Thermische Strömungsmaschinen und Maschinenlaboratorium

Kontakt

+49 711 685 63516

Visitenkarte (VCF)

Pfaffenwaldring 6
70569 Stuttgart
Deutschland
Raum: 1/19

Fachgebiet

  • Aeromechanik von Turbomaschinen (flutter, forced response)
  • Instationäre Strömungen in Turbomaschinen
  • Entwicklung von Versuchsständen zur gezielten Untersuchung von aeroelastischen Phänomenen inklusive Entwicklung von Messtechnik
  • Entwicklung von numerischen Modellen zur Berechnung der Schwingungsamplituden von Fluid-Struktur-gekoppelten Schwingungssystemen unter Berücksichtigung von Verstimmung
  • Entwicklung von pädagogischen Konzepten
  • Fuhrer, C., Kovachev, N., Vogt, D.M., Raja Mahalingam, G., Mann, S., 2023, Multi-Objective Numerical Optimization of Radial Turbines, ASME J. Turbomach., 146(3), 031004
  • Maqueo Martinez, M.E., Winkelmann, S., Vogt, D.M., Schatz, M., 2023, New Supersonic Nozzle Test Rig used to Generate Condensing Flow Test Data according to Barschdorff, Int. J. Turbomach. Propuls. Power 2023, 8, 40
  • Doll, P., Müller, F., Schippling, S., Vogt, D.M., Aschenbruck, J., 2023, Influence of a Rib in the Diffuser of a Low-pressure Steam Turbine on Aerodynamic Excitation at Part Load Operation, ASME Paper GT2023-104100
  • Ercan, I., Vogt, D.M., 2023, CFD Analysis of the Effect of a Cylindrical Probe Rod in the Axial Gap of the Last Stage on Rotating Instabilities in a Low-Pressure Model Steam Turbine operating at Low Load, ASME Paper GT2023-102480
  • Fomina, A., Fuhrer, C., Vogt, D.M., 2023, Numerical Study on the Influence of Geometrical Parameters on the Performance of a Turbine Exhaust Hood, ASME Paper GT2023-102206
  • Fuhrer, C., Kovachev, N., Vogt, D.M., Raja Mahalingam, G., Mann, S., 2023, Multi-Objective Numerical Optimization of Radial Turbines, ASME Paper GT2023-103918
  • Schippling, S., Fuhrer, C., Vogt, D.M., 2023, Aerodynamical Parametrization of Last Stage Steam Turbine Blades, ASME Paper GT2023-103951
  • Zobel, A., Fuhrer, C., Vogt, D.M., Nakos, A., Beirow, B., 2023, On the Influence of Bearing Modeling Details on the Dynamical System Effects of a Mid-size Turbocharger Rotor, ASME Paper GT2023-102098
  • Schafferus, M., Sasakaros, M., Wirsum, M., Zobel, A., Vogt, D.M., Nikos, A., Beirow, B., 2023, Experimental Investigation of Synchronous Flow Induced Blade Vibrations on a Radial Turbine - Part 1: Nominal Inlet Guide Vane, ASME Paper GT2023-103037
  • Schafferus, M., Sasakaros, M., Wirsum, M., Zobel, A., Vogt, D.M., Nikos, A., Beirow, B., 2023, Experimental Investigation of Synchronous Flow Induced Blade Vibrations on a Radial Turbine - Part 2: Influence of Different Inlet Guide Vane Configurations, ASME Paper GT2023-102243
  • Nakos, A., Beirow, B., Wirsum, M., Schafferus, M., Sasakaros, M., Vogt, D.M., Zobel, A., 2023, Mistuning and Damping of a Radial Turbine Wheel. Part 3: Validation of Intentional Mistuning during Machine Operation, ASME Paper GT2023-101993
  • Arifin, M., Fudholi, A., Schatz, M., Vogt, D.M., 2023, A Comparative Study of Mean-line Models based on Enthalpy Loss and Analysis of a Cavity-structured Radial Turbine for Solar Hybrid Microturbine Applications, Energy Conversion and Management, 287, 117075
  • Maqueo Martinez, M.E., Winkelmann, S., Vogt, D.M., Schatz, M., 2023, New Supersonic Nozzle Test Rig used to Generate Condensing Flow Test Data according to Barschdorff, ETC Paper No. ETC15-165
  • Beierl, M.R., Vogt, D.M., Fischer, M., Müller, T.R., So, K.K., 2023, Assessment of Low Engine Order Excitation of a Contaminated Turbocharger Radial Turbine Stage Using a Nozzle Ring Only Computational Model, ASME J. Turbomach., 145 (1), 011011
  • Arifin, M., Fudholi, A., Wahyudie, A., Vogt, D.M., 2022, Surrogate-based Optimization of Multiple-Splitters Radial Compressor for Solar Hybrid Microturbine, Energy Conversion and Management: X 16, 100332
  • Beierl, M.R., Vogt, D.M., Fischer, M., Müller, T.R., So, K.K., 2022, Numerical Investigation of the Excitation Characteristics of Contaminated Nozzle Rings, ISUAAAT Paper No. ISUAAAT16-019
  • Buchwald, P., Müller, F.F., Günther, M., Vogt, D.M., 2022, A New Axial Compressor Test Facility for the Investigation of Aerodynamic Damping featuring an Electromagnetic Excitation System, ISUAAAT Paper No. ISUAAAT16-021
  • Zobel, A., Vogt, D.M., Schafferus, M., Sasakaros, M., Wirsum., M., 2022, Intentional Excitation of a Radial Turbine Rotor by means of Geometrical Mistuning of the Vane Ring, ISUAAAT Paper No. ISUAAAT16-015
  • Hassan, A.S., Müller, T., Schatz, M., Vogt, D.M., 2022, Blade Vibration Analysis for Radial Turbine Featuring a Multi-Channel Casing Design, ASME J. Turbomach., 145(8), 081003
  • Bauer, M., Hummel, S., Schatz, M., Vogt, D.M., Kegalj, M., 2022, Investigation of the Flow Field and the Pressure Recovery in a Gas Turbine Exhaust Diffuser at Design, Part-Load and Over-Load Condition, ASME J. Turbomach., 144(8): 081010, https://doi.org/10.1115/1.4053836
  • Podeur, M., Vogt, D.M., 2022, Experimental Evaluation of Heat Transfer Effect on Turbocompressor Performance operating with Helium-Neon Gas Mixtures, EPJ Techniques and Instrumentation 9 (1), 6
  • Doll, P., Winkelmann, S., Müller, F.F., Vogt, D.M., Aschenbruck, J., 2022, Aerodynamic Damping of Last Stage Rotating Blades of Low Pressure Steam Turbine Determined From Vibration Test Data, ASME Paper GT2022-81979
  • Beierl, M.R., Vogt, D.M., Fischer, M., Müller, T.R., So, K.K., 2022, Assessment of Low Engine Order Excitation of a Contaminated Turbocharger Radial Turbine Stage Using a Nozzle Ring Only Computational Model, ASME Paper GT2022-82452 
  • Ercan, I., Vogt, D.M., 2022, Analysis of Turbulent Effects in a Low-Pressure Model Steam Turbine Operating Under Various Operating Conditions Using Detached Eddy Simulation, ASME Paper GT2022-80523
  • Podeur, M., Vogt, D.M., Experimental and Numerical Similitude Study Using a Novel Turbocompressor Test Facility Operating With Helium–Neon Gas Mixtures, ASME J. Turbomach., 144 (8): 081015, 2022
  • Heners, J.-P., Stotz, S., Krosse, A, Korte, D., Beck, M., Vogt, D.M., Prediction of transient Pressure Fluctuations within a Low-Pressure Turbine Cascade using a Lanczos-filtered Harmonic Balance Method, Int. J. Turbomach. Propuls. Power 2021, 6(3), 25; https://doi.org/10.3390/ijtpp6030025, 2021
  • Podeur, M., Vogt, D.M., Experimental and Numerical Similitude Study using a Novel Turbocompressor Test Facility operating with Helium-Neon Gas Mixtures, ASME Paper GT2021-60204, 2021
  • Ercan, I. Vogt, D.M., Detached Eddy Simulation of Rotating Instabilities in a Low-Pressure Model Steam Turbine operating under Low Volume Flow Conditions, ASME Paper GT2021-58704, 2021
  • Hummel, S., Bauer, M., Vogt, D.M., Study of the Gas Turbine Exhaust Diffuser Flow and Performance Characteristics at Off-Design Conditions, Paper No ETC2021-590 presented at the 14th European Conference on Turbomachinery, April 12-16, 2021, Gdansk, Poland, 2021
  • Heners, J.-P., Stotz, S., Krosse, A, Korte, D., Beck, M., Vogt, D.M., Prediction of transient Pressure Fluctuations within a Low-Pressure Turbine Cascade using a Lanczos-filtered Harmonic Balance Method, Paper No ETC2021-590 presented at the 14th European Conference on Turbomachinery, April 12-16, 2021, Gdansk, Poland, 2021
  • Hanimann, L., Mangani, L., Darwish, M., Casartelli, E., Vogt, D.M., A Consistent and Implicit Rhie–Chow Interpolation for Drag Forces in Coupled Multiphase Solvers, Int. J. Turbomach. Propuls. Power 2021, 6(2), 7;   https://doi.org/10.3390/ijtpp6020007, 2021
  • Hassan, A.S., Schatz, M., Vogt, D.M., Performance and Loss Analysis for Radial Turbine featuring a Multi-Channel Design, ASME J. Turbomach., 143(2): 021003, 2021
  • Buchwald, P., Waldherr, C.U., Schell, J., Steger, H., Vogt, D.M., Experimental and Numerical Modal Analysis of an Axial Compressor Blisk, Vibration Engineering for a Sustainable Future, 379-387, 2021
  • Müller, T.R., Vogt, D.M., Fischer, M., Phillipsen, B.A., On the Far-Field Boundary Condition Treatment in the Framework of Aeromechanical Computations using ANSYS CFX, IMECHE J. Power and Energy, https://doi.org/10.1177%2F0957650920962698, 2021
  • Podeur, M., Vogt, D.M., Mauri, S., Jenny, P., Impeller Design and Multi-stage Architecture Optimisation for Turbocompressors operating with a Helium-Neon Gas Mixture, International Journal of Gas Turbine, Propulsion and Power Systems XX 2020, Volume 11, Number 4, 2020
  • Kovachev, N., Vogt, D.M., Numerical Investigation of the Effect of Operating Point on the Aerodynamic Excitation in a Radial Turbine Stage, ASME Paper GT2020-16045, 2020
  • Bauer, M., Hummel, S., Schatz, M., Vogt, D.M., Kegalj, M., Investigation of the Flow Field and the Pressure Recovery in a Gas Turbine Exhaust Diffuser at Design, Part-Load and Over-Load Condition, ASME Paper GT2020-14310, 2020
  • Dietmann, F., Casey, M., Vogt, D.M., Reynolds Number and Roughness Effects on Turbocompressor Performance: Numerical Calculations and Measurement Data Evaluation, ASME Paper GT2020-14653, 2020
  • Heners., J.-P., Müller-Schindewolffs, C., Blum, F., Vogt, D.M., Prediction of the Unsteady Transition Behavior in Low Pressure Turbine Flows Using Time and Frequency Domain Methods, ASME Paper GT2020-14257, 2020
  • Arifin, M., Schatz, M., Vogt, D.M., Design and Optimization of Turbomachinery Components for Parabolic Dish Solar Hybrid Micro Gas Turbine, ASME Paper GT2020-15270, 2020
  • Hassan, A.S., Müller, T., Schatz, M., Vogt, D.M., Aerodynamic Damping Analysis of a Radial Turbine Featuring a Multi-Channel Casing Design, ASME Paper GT2020-14410, 2020
  • Hassan, A.S., Schatz, M., Vogt, D.M., Performance and Loss Analysis for Radial Turbine featuring a Multi-Channel Design, ASME Paper GT2020-16298, 2020
  • Hanimann, L., Mangani, L., Casartelli, E., Vogt, D.M., Darwish, M., Real Gas Models in Coupled Algorithms Numerical Recipes and Thermophysical Relations, Int. J. Turbomach. Propuls. Power 2020, 5(3), 20; https://doi.org/10.3390/ijtpp5030020, 2020
  • Brüggemann, C., Badum., L., Bauer, M., Schatz, M., Vogt, D.M., Fast Traveling Pneumatic Probes for Turbomachinery Applications, International Journal of Gas Turbine, Propulsion and Power Systems April 2020, Volume 11, Number 2, 2020
  • Waldherr, C.U., Buchwald, P., Vogt, D.M., A New Mistuning Identification Method Based on the Subset of Nominal Modes Method, ASME J. Eng. Gas Turbines Power, 142(2): 021016, 2020
  • Buchwald, P., Waldherr, C.U., Schell, J., Steger, H., Vogt, D.M., Experimental and Numerical Modal Analysis of an Axial Compressor Blisk, paper presented at the 18th Asian-pacific Vibration Conference, 18-20 November, 2019, Sidney, Australia, 2019
  • Podeur, M., Vogt, D.M., Mauri, S., Jenny, P., Impeller Design and Multi-stage Architecture Optimisation for Turbocompressors operating with a Helium-Neon Gas Mixture , paper presented at the International Gas Turbine Congress, November 17-22, 2019, Tokyo, Japan, 2019
  • Fuhrer, C., Vogt, D.M., The Influence of Spontaneous Condensation on the Predicted Aerodynamic Damping of a Steam Turbine Tip Section, paper presented at the International Gas Turbine Congress, November 17-22, 2019, Tokyo, Japan, 2019
  • Brüggemann, C., Badum., L., Bauer, M., Schatz, M., Vogt, D.M., Fast Traveling Pneumatic Probes for Turbomachinery Applications, paper presented at the International Gas Turbine Congress, November 17-22, 2019, Tokyo, Japan, 2019
  • Buchwald, P., Farahmand, A., Vogt, D.M., On the Influence of Blade Aspect Ratio on Aerodynamic Damping, ASME J. Turbomach., 141(10): 101007, 2019
  • Heners, J.-P., Vogt, D.M., Frey, C., Ashcroft, G., Investigation of the Impact of Unsteady Turbulence Effects on the Aeroelastic Evaluation Process of a Low-Pressure Turbine Rotor Blade, ASME J. Turbomach., 141(10): 100801, 2019
  • Blackburne, J., Netzhammer, S., Vogt, D.M., Reducing Resonant Low Engine Order (LEO) Blade Vibrations by Means of Tip Injection – a Study of the Underlying Mechanisms, paper presented at the 24th ISABE conference, September 23-27, 2019, Canberra, Australia, 2019
  • Sun, T., Petrie-Repar, P., Vogt, D.M., Hou, A., Detached-Eddy Simulation Applied to Aeroelastic Stability Analysis in a Last-Stage Steam Turbine Blade, ASME J. Turbomach., 141(9): 091002, 2019
  • Waldherr, C.U., Vogt, D.M., An Extension of the Classical Subset of Nominal Modes Method for the Model Order Reduction of Gyroscopic Systems, ASME J. Eng. Gas Turbines Power, 141(5): 052501, 2019
  • Mihailowitsch, M., Schatz, M., Vogt, D.M., Numerical Investigations of an Axial Exhaust Diffuser Coupling the Last Stage of a Generic Gas Turbine, ASME J. Eng. Gas Turbines Power, 141(3): 031025, 2019
  • Hassan, A.S., Blackburne, J., Kovachev, N., Schatz, M., Vogt, D.M., Aerodynamic Excitation Analysis of a Radial Turbine Featuring a Multi-Channel Casing Design, ASME Paper GT2019-90105, 2019
  • Kovachev, N., Müller, T.R., Waldherr, C.U., Vogt, D.M., Prediction of Low-Engine Order Excitation due to a Non-Symmetrical Nozzle Ring in a Radial Turbine by means of the Nonlinear Harmonic Approach,  ASME Paper GT2019-90366, 2019
  • Netzhammer, S., Vogt, D.M., Krätschmer, S., Leweux, J., Blackburne, J., Reducing Blade Forced Response in a Radial Turbine by means of Jet Injection, ASME Paper GT2019-90541, 2019
  • Pinelli, L., Vanti, F., Arnone, A., Bessling, B., Vogt, D.M., Influence of Tip Shroud Modeling on the Flutter Stability of a Low Pressure Turbine Rotor, ASME Paper GT2019-91204, 2019
  • Waldherr, C.U., Buchwald, P., Vogt, D.M., A New Mistuning Identification Method Based on the Subset of Nominal Modes Method, ASME Paper GT2019-91702
  • Brüggemann, C., Schatz, M., Vogt, D.M., Experimental and Numerical Assessment of the Impact of Part-Span Connectors on Turbine Efficiency and Flow Field, ASME Paper GT2019-91815, 2019
  • Munyoki, D., Schatz, M., Vogt, D.M., Numerical Investigation of the Influence of flow Deflection at the upper Hood on Performance of Low Pressure Steam Turbine Exhaust Hoods, ASME Paper GT2019-90391, 2019
  • Bareiss, S., Vogt, D.M., Numerical investigation on the design of circumferential groove casing treatments in a radial compressor, Paper No ETC2019-038 presented at the 13th European Conference on Turbomachinery, April 8-12, 2019, Lausanne, Switzerland, 2019
  • Hanimann, L., Mangani, L., Casartelli, E., Vogt, D.M., Robust Integration of Real Gas Models into a Pressure-based Coupled Solver, Paper No ETC2019-218 presented at the 13th European Conference on Turbomachinery, April 8-12, 2019, Lausanne, Switzerland, 2019
  • Hassan, A.S., Fuhrer, C., Schatz, M., Vogt, D.M., Multi-Channel Casing Design for Radial Turbine Operation Control, Paper No ETC2019-021 presented at the 13th European Conference on Turbomachinery, April 8-12, 2019, Lausanne, Switzerland, 2019
  • Kovachev, N., Waldherr, C.U., Mayer, J.F., Vogt, D.M., Prediction of Aerodynamically Induced Blade Vibrations in a Radial Turbine Rotor using a Nonlinear Harmonic Approach, ASME J Eng. Gas Turbines Power, 141(2): 021007, 2019
  • Naik, P., Lehmayer, B., Homeier, S., Klaus, M., Vogt, D.M., Influence of Turbocharger Turbine Blade Geometry on Vibratory Blade Stresses, ASME J Eng. Gas Turbines Power, 141(2): 021015, 2019
  • Heners, J.-P., Vogt, D.M., Frey, C., Ashcroft, G., Investigation of the Impact of Unsteady Turbulence Effects on the Aeroelastic Evaluation Process of a Low-Pressure Turbine Rotor Blade, ISUAAAT Paper No ISUAAAT15-014, 2018
  • Buchwald, P., Farahmand, A., Vogt, D.M., On the Influence of Blade Aspect Ratio on Aerodynamic Damping, ISUAAAT Paper No ISUAAAT15-055, 2018
  • Müller, T.R., Vogt, D.M., Fischer, M., Phillipsen, B.A., On the Far-Field Boundary Condition Treatment in the Framework of Aeromechanics Computations using ANSYS CFX, ISUAAAT Paper No ISUAAAT15-063, 2018
  • Grübel, M., Schatz, M., Vogt, D.M., Second Law Analysis of Condensing Steam Flows, ASME J Eng. Gas Turbines Power, 140(12): 121003, 2018
  • Sun, T., Petrie-Repar, P., Vogt, D.M., Detached-Eddy Simulation Applied to the Tip-Clearance Flow in a Last Stage Steam Turbine Blade, ASME Paper GT2018-75943, 2018
  • Naik, P., Lehmayer, B., Homeier, S., Klaus, M., Vogt, D.M., Influence of Turbocharger Turbine Blade Geometry on Vibratory Blade Stresses, ASME Paper GT2018-76226, 2018
  • Mihailowitsch, M., Schatz, M., Vogt, D.M., Numerical Investigations of an Axial Exhaust Diffuser Coupling the Last Stage of a Generic Gas Turbine, ASME Paper GT2018-75185, 2018
  • Müller, T.R., Vogel, K., Phillipsen, B.A., Vogt, D.M., Influence of Intrarow Interaction on the Aerodynamic Damping of an Axial Turbine Stage, ASME Paper GT2018-76777, 2018
  • Kovachev, N., Waldherr, C.U., Mayer, J.F., Vogt, D.M., Prediction of Aerodynamically Induced Blade Vibrations in a Radial Turbine Rotor using a Nonlinear Harmonic Approach, ASME Paper GT2018-76814, 2018
  • Grübel, M., Schatz, M., Vogt, D.M., Second Law Analysis of Condensing Steam Flows, ASME Paper GT2018-76388, 2018
  • Waldherr, C.U., Vogt, D.M., An Extension of the Classical Subset of Nominal Modes Method for the Model Order Reduction of Gyroscopic Systems, ASME Paper GT2018-76742, 2018
  • Grübel, M., Starzmann, J., Schatz, M., Vogt, D.M., Modelling of condensing steam flows in Laval nozzles with ANSYS CFX, IMECHE J. Power and Energy, 232(5), pp.571-575, 2017
  • Müller, T.R., Vogt, D.M., Vogel, K., Phillipsen, B.A., Hönisch, P., Influence of Detailing on Aerodynamic Forcing of a Transonic Axial Turbine Stage and Forced-Response Prediction for Low-Engine-Order (LEO) Excitation, ASME Paper GT2017-64502, 2017
  • Netzhammer, S., Krätschmer, S., Leweux, J., Köngeter, A., Vogt, D.M., Aerodynamic Excitation Analysis of Radial Turbine Blades due to Unsteady Flow From Vaneless Turbine Housings, ASME Paper GT2017-64468, 2017
  • Fuhrer, C., Vogt, D.M., On the Impact of Simulation Approaches on the Predicted Aerodynamic Damping of a Low Pressure Steam Turbine Rotor, ASME Paper GT2017-63401, 2017
  • Müller, F.F., Schatz, M., Vogt, D.M., Aschenbruck, J., Influence of a Cylindrical Exhaust Hood Installation on the Last Stage Rotor Blades of a Low Pressure Model Steam Turbine, ASME Paper GT2017-63280, 2017
  • Brüggemann, C., Schatz, M., Vogt, D.M., Poppig, F., A Numerical Investigation of the Impact of Part-Span Connectors on the Flow Field in a Linear Cascade, ASME Paper GT2017-63359, 2017
  • Grübel, M., Dovik, R.M., Schatz, M., Vogt, D.M., A Methodology for a Detailed Loss Prediction in Low Pressure Steam Turbines, ASME Paper GT2017-63404, 2017
  • Munyoki, D., Schatz, M., Vogt, D.M., Detailed Numerical Study of the Main Sources of Loss and Flow Behavior in Low Pressure Steam Turbine Exhaust Hoods, ASME Paper GT2017-63269, 2017
  • Buchwald, P., Vogt, D.M., Grilliat, J., Laufer, W., Lucius, A., Schneider, M., Schmitz, M.B., Aeroacoustic Analysis of Low-Speed Axial Fans With Different Rotational Speeds in the Design Point, ASME J. Eng. Gas Turbines Power 140(5), 052601-052601-12, 2017
  • Buchwald, P., Vogt, D.M., Grilliat, J., Laufer, W., Lucius, A., Schneider, M., Schmitz, M.B., Aeroacoustic Analysis of Low-Speed Axial Fans With Different Rotational Speeds in the Design Point, ASME Paper GT2017-64417, 2017
  • Gutierrez Salas, M., Bladh, R., Petrie-Repar, P., Vogt, D.M., Mårtensson, H., Fransson, T.H., Forced Response Analysis of a Mistuned Compressor Blisk Comparing Three Different Reduced Order Model Approaches, ASME J. Eng. Gas Turbines Power 139(6), 062501-062501-12, 2017
  • Starzmann, J., Hughes, F., White, A.J., Grübel, M., Vogt, D.M., Numerical Investigation of Boundary Layers in Wet Steam Nozzles, J. Eng. Gas Turbines Power 139(1), 012606-012613, 2017
  • Müller, F.F., Schatz, M., Vogt, D.M., Rehnsch, A., Experimental Investigation of a Low Pressure Model Steam Turbine With Supporting Rib in Close Vicinity to the Last Stage Rotor Blades at Varying Operating Conditions, ASME Paper GT2016-57258, 2016
  • Starzmann, J., Hughes, F., White, A.J., Grübel, M., Vogt, D.M.,  Numerical Investigation of Boundary Layers in Wet Steam Nozzles, ASME Paper GT2016-57598, 2016
  • Fuhrer, C., Grübel, M., Petrie-Repar, P., Vogt, D.M.,  The Influence of Non-equilibrium Wet Steam Effects on the Aeroelastic Properties of a Turbine Blade Row, ASME Paper GT2016-57899, 2016
  • Gutierrez Salas, M., Bladh, R., Petrie-Repar, P., Vogt, D.M., Mårtensson, H., Fransson, T.H.,  Forced Response Analysis of a Mistuned Compressor Blisk Comparing Three Different Reduced Order Model Approaches, ASME Paper GT2016-57902, 2016
  • Vogt, D.M.,  Numerical and Experimental Study on the Influence of Damping Elements on the Flow and the Vibration Behavior of Industrial Steam Turbine Blades, keynote lecture given at the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), April 10-15, 2016, Honolulu, USA
  • Häfele, M., Traxinger, C., Schatz, M., Vogt, D.M., Drozdowski, R.,  Experimental and Numerical Investigation of the Flow in a LP Industrial Steam Turbine with Part-Span Connectors, J. Eng. Gas Turbines Power 138(7), 072604-072604, 2016
  • Drozdowski, R., Völker, L., Häfele, M., Vogt, D.M.,  Numerical and experimental analysis of low-pressure steam turbine blades coupled with lacing wire, J Power and Energy 230(3), pp. 332-342, 2016
  • Häfele, M., Traxinger, C., Grübel, M., Schatz, M., Vogt, D.M., Drozdowski, R.,  Numerical and Experimental Study on Aerodynamic Optimization of Part-Span Connectors in the last stage of a low-pressure industrial steam turbine, J. Power and Energy 229(5), pp. 465-476, 2015
  • Fuhrer, C., Vogt, D.M.,  Prediction of Flutter Stability of an Aeroelastically Unstable Linear Low-Pressure Turbine Cascade by Applying the Influence Coefficients Approach on Numerical Data, Paper presented at the 14th ISUAAAT Symposium, September 8-11, 2015, Stockholm, Sweden
  • Gezork, T., Gutierrez, M., Groth, P., Vogt, D.M., Fransson, T.H.,  Unsteady Blade Force Computation Sensitivity in a Transonic Turbine to Rotor Tip Gap, Hub and Shroud Cavity Modal Detail, Paper presented at the 14th ISUAAAT Symposium, September 8-11, 2015, Stockholm, Sweden
  • Petrie-Repar, P., Fuhrer, C., Grübel, M., Vogt, D.M.,  Two-Dimensional Steam Turbine Flutter Test Case, Paper presented at the 14th ISUAAAT Symposium, September 8-11, 2015, Stockholm, Sweden
  • Vogt, D.M.,  The Challenges of Steam Turbines in Industrial Applications, Panel lecture held at the 2015 ASME IGTI Turbo Expo Conference, June 15-19, 2015, Montreal, Canada
  • Thomas, R., Pradeep, A.M., Roy, B., Schatz, M., Kuschel, B., Schatz, M., Vogt, D.,  Influence of Tip Jet Mass Flow and Blowing Rate on the Performance of an Axial Diffuser at Different Inlet Total Pressure Profiles, ASME Paper GT2015-43427, 2015
  • Ilievski, M., Heidinger, F., Fuhrer, C., Vogt, D.M., Challand, S., Schatz, M.,  Experimental and Numerical Investigation of Partial Admission of a Radial Turbocharger Turbine for Improved Off-Design Performance, ASME Paper GT2015-43318, 2015
  • Häfele, M., Traxinger, C., Schatz, M., Vogt, D.M., Drozdowski, R.,  Experimental and Numerical Investigation of the Flow in a LP Industrial Steam Turbine with Part-Span Connectors, ASME Paper GT2015-42202, 2015
  • Drozdowski, R., Völker, L. Häfele, M., Vogt, D.M.,  Experimental and Numerical Investigation of the Nonlinear Vibrational Behavior of Steam Turbine Last Stage Blades with Friction Bolt Damping Elements, ASME Paper GT2015-42244, 2015
  • Bareiss, S., Vogt, D.M., Chebli, E.,  Investigation on the Impact of Circumferential Grooves on the Aerodynamic Centrifugal Compressor Performance, ASME Paper GT2015-42211, 2015
  • Drozdowski, R., Völker, L., Häfele, M., Vogt, D.M.,  Numerical and Experimental Analysis of LP Turbine Blades coupled with Lacing Wire, Paper No ETC2015-105 presented at the 11th European Conference on Turbomachinery, March 23-27, 2015, Madrid, Spain
  • Häfele, M., Traxinger, C., Schatz, M., Vogt, D.M., Drozdowski, R.,  Numerical and Experimental Study on the Aerodynamic Optimization of Part-Span Connectors in the Last Stage of an LP Industrial Steam Turbine, Paper No ETC2015-054 presented at the 11th European Conference on Turbomachinery, March 23-27, 2015, Madrid, Spain
  • Gutierrez, M., Gezork, T., Yang, S., Vogt, D.M., Fransson, T.H.,  Forced Response Analysis of a Transonic Turbine using a Free-Interface Component Mode Synthesis Method, Paper No ETC2015-227 presented at the 11th European Conference on Turbomachinery, March 23-27, 2015, Madrid, Spain
  • Brouwer (née Volker), S., Vogt, D.M.,  Simulation of a Flow in a Gas Turbine Exhaust Diffuser with Advanced Turbulence Models, Chapter in "High Performance Computing in Science and Engineering '14", W.E. Nagel, D.B. Kröner, M.M. Resch (Eds.), Springer, 2015
  • Monaco, L., Fransson, T., Vogt, D.M., Bergmans, J.,  Remotely Operated Aeroelastically Unstable LPT Cascade for Turbomachinery Aeromechanics Education and Training - Remote Flutter Lab, J. Eng. Gas Turbines Power 137(3), 032507-032514, 2014
  • Grübel, M., Starzmann, J., Schatz, M., Eberle, T., Vogt, D.M.,  Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 1: Numerical Validation of Wet Steam Models and Turbine Modeling, J. Eng. Gas Turbines Power 137(4), pp. 042602-042612, 2014
  • Schatz, M., Eberle, T., Starzmann, J., Grübel, M., Vogt, D.M.,  Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 2: Turbine Wetness Measurement and Comparison to CFD Predictions, J. Eng. Gas Turbines Power 137(4), pp. 042603-042601, 2014
  • Vogt, D.M.,  Forced-Response Predictions from Academic Point of View, Panel lecture held at the 2014 ASME IGTI Turbo Expo Conference, Dusseldorf, Germany, June 16-20, 2014
  • Grübel, M., Starzmann, J., Schatz, M., Eberle, T., Vogt, D.M.,  Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 1: Numerical Validation of Wet Steam Models and Turbine Modeling, ASME Paper GT2014-25244, 2014
  • Schatz, M., Eberle, T., Starzmann, J., Grübel, M., Vogt, D.M.,  Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 2: Turbine Wetness Measurement and Comparison to CFD Predictions, ASME Paper GT2014-25245, 2014
  • Häfele, M., Starzmann, J., Grübel, M., Schatz, M., Vogt, D.M.,  Numerical Investigation of the Impact of Part-Span Connectors on Aero-Thermodynamics in a Low Pressure Industrial Steam Turbine, ASME Paper GT2014-25177, 2014
  • Gezork, T., Fransson, T.H., Mayorca, M.A., Groth, P., Vogt, D.M.,  Influence of Tip Shroud Cavity Detailing on Turbine Blade Forcing Calculations, ASME Paper GT2014-26724, 2014
  • Monaco, L., Fransson, T., Vogt, D.M., Bergmans, J.,  Remotely Operated Aeroelastically Unstable LPT Cascade for Turbomachinery Aeromechanics Education and Training - Remote Flutter Lab, ASME Paper GT2014-27170, 2014
  • Dietmann, F., Vogt, D.M.,  Ölfreier CO2-Verdichter für Wärmepumpen, Paper presented at the Deutsche Kälte-Klimatagung, Hannover, Germany, November 21-22, 2013
  • Freund, O., Bartelt, M., Mittelbach, M., Montgomery, M., Vogt, D.M., Seume, J.R.,  Impact of the Flow of an Acoustic Excitation System for Aeroelastic Studies, ASME J. of Turbomachinery, 133, pp. 031033-031041, 2013
  • Mayorca, M., Vogt, D.M., Mårtensson, H., Fransson, T.H.,  Prediction of Turbomachinery Aeroelastic Behavior from a Set of Representative Modes, ASME J. of Turbomachinery, 135, pp. 011032-011042, 2013
  • Vogt, D.M., Fransson, T.H.,  Aeroelasticity of Turbomachines, Paper presented at the MUSAF II Colloquium, Toulouse, France, September 18-20, 2013
  • Vogt, D.M.,  Sensitivity of Aerodynamic Damping Values Determined from Unsteady Blade Surface Pressures Measurements, Paper presented at the 18th Blade Mechanics Seminar, Winterthur, Switzerland, September 11, 2013
  • Platzer, M.F., Lennie, M., Vogt, D.M.,  Analysis of the Conversion of Ocean Wind Power into Hydrogen, Paper presented at the World Renewable Energy Congress, Murdoch, Australia, July 14-18, 2013
  • Vogt, D.M., Fransson, T.H.,  Current Research on Turbomachinery Flutter within the EU Collaborative Research Project FUTURE, invited lecture at the 13th ISUAAAT Symposium, Tokyo, Japan, September 11-14, 2012
  • Vogt, D.M., Fransson, T.H.,  Towards Flutter-Free Turbomachinery Blades, Chapter in "Innovation for Sustainable Aviation in a Global Environment", D. Knörzer and J. Szodruch (Eds.), IOS Press, 2012
  • Mayorca M.A., Vogt D.M., Mårtensson H., Fransson T.H.,  A New Reduced Order Modeling for Stability and Forced Response Analysis of Aero-Coupled Blades Considering Various Mode Families, ASME J. of Turbomachinery,  34, pp. 051008 - 051017, 2012
  • Fruth, F., Vogt, D.M., Fransson, T.H.,  Harmonic Force Variation due to Change in  Blade Count Ratio - Physical Interpretation, Paper presented at the 13th ISUAAAT Symposium, Tokyo, Japan, September 11-14, 2012
  • Glodic, N., Vogt, D.M., Fransson, T.H.,  Influence of Tip Clearance Modeling in Predictions of Aeroelastic Response in an Oscillating LPT Cascade, Paper presented at the 13th ISUAAAT Symposium, Tokyo, Japan, September 11-14, 2012
  • Vogt, D.M., Fransson, T.H.,  Podcasting the Whiteboard - A New Way of Teaching Engineers, ASME Paper GT2012-70154, 2012
  • Sanz Luengo, A., Vogt, D.M., Schmitt, S., Fransson, T.H.,  Validation of a Linearized Navier-Stokes Based Flutter Prediction Tool - Part 2: Quantification of the Prediction Accuracy on a Turbine Test Case, ASME Paper GT2012-69682, 2012
  • Monaco, L., Vogt, D.M., Fransson, T.H.,  Implementation of a Remote Pump Laboratory Exercise in the Training of Engineering Students, ASME Paper GT2012-69983, 2012
  • Mayorca, M.A., Vogt, D.M., Fransson, T.H., Mårtensson, H., Andersson, C.,  Uncertainty of Forced Response Numerical Predictions of an Industrial Blisk - Comparison with Experiments, ASME Paper GT2012-69534, 2012
  • Freund, O., Bartelt, M., Seume, J.R., Mittelbach, M., Montgomery, M., Vogt, D.,  Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies, ASME Paper GT2012-69966, 2012
  • Vogt, D.M.,  Experimental Research on Aeroelasticity, VKI Lecture Series on “Structural Design of Aircraft Engines: Key Objectives and Techniques”, VKI LS RTO-AVT-VKI 207, Rhode-Saint-Genèse, Belgium, 2012
  • Monaco, L., Vogt, D.M., Fransson, T.H.,  A New Linear Cascade Test Facility for Use in Engineering Education, Paper presented at the 21st Symposium on Measuring Techniques in Turbomachinery, Valencia, Spain, March 22-23, 2012
  • Sanz Luengo, A., Vogt, D.M., Fransson, T.H.,  Resonances Influence in Recessed-Mounted Transducers Used for Unsteady Pressure Measurements, Paper presented at the 21st Symposium on Measuring Techniques in Turbomachinery, Valencia, Spain, March 22-23, 2012
  • Vogt, D.M.,  Turbomachinery Blade Vibrations - Meeting the Challenge, invited lecture at the 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, USA, February 27 - March 2, 2012
  • Vogt, D.M., Mårtensson, H.M., Bladh, R.,  TurboVib - A Swedish Research Initiative Addressing Turbomachinery Vibratory Phenomena, Paper presented at the 20th ISABE Conference in Gothenburg, Sweden, September 12-16, 2011
  • Mayorca, M.A., De Andrade, J.A., Vogt, D.M., Mårtensson, H., Fransson, T.H.,  Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage, ASME J. of Turbomachinery, 133, pp.021013 - 021013-10, 2011
  • Mayorca, M., Vogt, D.M.,. Mårtensson, H., Fransson, T.H.,  Prediction of Turbomachinery Aeroelastic Behavior From a Set of Representative Modes, ASME Paper GT2011-46690, 2011
  • Fruth, F., Vogt, D.M., Fransson, T.H.,  Influence of the Blade Count Ratio on Aerodynamic Forcing - Part II: High Pressure Transonic Turbine, ASME Paper GT2011-46071, 2011
  • Glodic, N., Vogt, D.M., Fransson, T.H.,  Experimental and Numerical Investigation of Mistuned Aerodynamic Influence Coefficients in an Oscillating LPT Cascade, ASME Paper GT2011-46283, 2011
  • Hosseini, S.M., Fruth, F., Vogt, D.M., Fransson, T.H.,  Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Turbine Stage, ASME Paper GT2011-45813, 2011
  • Vogt, D.M., Fransson, T.H.,  Turbomachinery Aeroelasticity Analyses - Everyday Business or Exceptional Challenge?, invited lecture at the 9th European Conference on Turbomachinery, Istanbul, Turkey, March 21-25, 2011
  • Mayorca, M.A., De Andrade, J.A., Vogt, D.M., Mårtensson, H., Fransson, T.H.,  Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage, ASME J. of Turbomachinery, 133, pp.021013 - 021013-10, 2010
  • Mayorca M.A., Vogt D.M., Mårtensson H., Fransson T.H.,  A New Reduced Order Modeling for Stability and Forced Response Analysis of Aero-Coupled Blades Considering Various Mode Families, ASME Paper GT2010-22745, 2010
  • Fruth, F., Vogt, D.M., Mårtensson, H., Mayorca, M.A., Fransson, T.H.,  Influence of the Blade Count Ratio on Aerodynamic Forcing - Part I: Highly Transonic Compressor, ASME Paper GT2010-22756, 2010
  • Yasa, T., Paniagua, G., Fridh, J., Vogt, D.,  Performance of a Nozzle Guide Vane in Subsonic and Transonic Regimes Tested in an Annular Sector, ASME Paper GT2010-22901, 2010
  • Mayorca M.A., Vogt D.M., Mårtensson H., Fransson T.H.,  Numerical Tool for Prediction of Aeromechanical Phenomena in Gas Turbines, Paper presented at the 19th ISABE Conference in Montreal, Canada, September 7-11, 2009
  • Vogt. D.M., Glodic, N., Fransson, T.H.,  The Effect of Unsteady Aerodynamic Asymmetric Perturbations on the Mode Shape Sensitivity of an Oscillating LPT Cascade, Paper presented at the 12th ISUAAAT Symposium in London, UK, September 1-4, 2009
  • Glodic, N., Bartelt, M., Vogt, D., Fransson, T.,  Aeroelastic Properties of Combined Mode Shapes in an Oscillating LPT Cascade, Paper presented at the 12th ISUAAAT Symposium in London, UK, September 1-4, 2009
  • Mayorca, M.A., De Andrade, J.A., Vogt, D.M., Mårtensson, H., Fransson, T.H.,  Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage, ASME Paper GT2009-59601, 2009
  • Vogt, D.M.,  Experimental Research on Aeroelasticity, VKI Lecture Series on “ Structural Design of Aircraft Engines: Key Objectives and Techniques”, VKI LS 2008-07, Sint Genesius Rode, 2008
  • Vogt, D.M., Fridh, J.E., Fransson, T.H.,  Characterization and First Application of a Thin-Film Electret Unsteady Pressure Measurement Technique, Paper presented at the 19th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Brussels, Belgium, 2008
  • Mårtensson, H., Gunnsteinsson, S.S., Vogt, D.M.,  Aeroelastic Properties of Closely Spaced Modes for a Highly Loaded Transonic Fan, ASME Paper GT2008-51046, 2008
  • Andrinopoulos, N., Vogt, D., Hu, J., Fransson, T.H.,  Design and Testing of a Vibrating Test Object for Investigating Fluid-Structure Interaction, ASME Paper GT2008-50740, 2008
  • Vogt, D.M., Fransson, T.H.,  Experimental Investigation of Mode Shape Sensitivity of an Oscillating LPT Cascade at Design and Off-Design Conditions, ASME J. of Engineering for Gas Turbines and Power, 129, pp.530-541, 2007
  • Vogt, D.M., Mårtensson, H.E., Fransson, T.H.,  Direct Calculation of Aerodynamic Influence Coefficients Using a Commercial CFD Solver, Paper presented at the 18th ISABE Conference in Beijing, September 2-7, 2007
  • Vogt, D.M., Mårtensson, H.E., Fransson, T.H.,  Experimental and Numerical Study of Unsteady Aerodynamics in an Oscillating Low-Pressure Turbine Cascade of Annular Sector Shape, Paper presented at the 11th ISUAAAT Symposium in Moscow, Russia, September 4-8, 2006
  • Vogt, D.M., Fransson, T.H.,  Experimental Investigation of Mode Shape Sensitivity of an Oscillating LPT Cascade at Design and Off-Design Conditions, ASME paper GT2006-91196, 2006
  • Vogt, D.M., Fridh, J., Fransson, T.H.,  Design and Construction of a New Modular Wind Tunnel System, Paper presented at the 18th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Thessaloniki, Greece, 2006
  • Vogt, D.M., Mårtensson, H.E., Fransson, T.H.,  Validation of a Three-Dimensional Flutter Prediction Tool, Paper presented at the NATO Symposium on Evaluation, Control and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles, Granada, Spain, 2005
  • Mårtensson, T.H., Vogt, D.M., Fransson, T.H.,  Assessment of a 3D Linear Flutter Prediction Tool using Sector Cascade Test Data, ASME Paper GT2005-68453, 2005
  • Vogt, D.M., Fransson, T.H.,  A Technique for Using Recessed-Mounted Pressure Transducers to Measure Unsteady Pressure, Paper presented at the 17th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Stockholm, Sweden, 2004
  • Vogt, D.M., Fransson, T.H.,  Effect of Blade Mode Shape on the Aeroelastic Stability of a LPT Cascade, Paper presented at the 9th National Turbine Engine High Cycle Fatigue (HCF) Conference, Pinehurst, North Carolina, USA, 2004
  • Fransson, T.H., Vogt, D.M.,  A New Facility for Investigating Flutter in Axial Flow Turbomachines, Paper presented at the 8th National Turbine Engine High Cycle Fatigue (HCF) Conference, Monterey, California, USA, 2003
  • Vogt, D.M., Fransson, T.H.,  A New Turbine Cascade for Aeromechanical Testing, Paper presented at the 16th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Cambridge, UK, 2002
  • Zangeneh, M., Vogt, D., Roduner, C.,  Improving a Vaned Diffuser for a Given Centrifugal Impeller by 3D Inverse Design, ASME Paper GT2002-30621, 2002
  • Saxer, A.P., Saxer-Felici, H.M., Vogt, D.M.A., Sell, M., Gyarmathy, G,  A Feasibility Study for Performance Prediction of Circumferentially Compound Stage Model Turbines, AIAA J. of Propulsion and Power, 16, No. 4, 2000, pp.687-696, 2000
  • Vogt, D.M., Fransson, T.H.,  Aerodynamic Influence Coefficients on an Oscillating Turbine Blade in Three-Dimensional High Speed Flow, Paper presented at the 15th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Florence, Italy, 2000
  •  

Dozent der folgenden Lehrveranstaltungen: 

  • "Grundlagen der Thermischen Strömungsmaschinen"
  • "Thermische Strömungsmaschinen"
  • "Turbomachinery Blade Vibrations"
  • "Turbochargers"

Studiendekan Masterstudiengang "M.Sc. Energietechnik"

  • 2023: Prodekan der Fakultät 4, Universität Stuttgart
  • 2023: "ETC15 Best Paper Award" für die Veröffentlichung ETC15-165
  • 2023: Ernennung zum Fellow der ASME
  • 2022: “ASME IGTI Turbomachinery Committee Best Paper Award” für die Veröffentlichung GT2021-60204
  • Seit 2022: Member-at-Large des ASME TEC Councils
  • Seit 2022: Mitglied des Scientific Committees des International Symposium of Unsteady Aerodynamics, Aeroelasticity and Aeroacoustics of Turbomachines (ISUAAAT)
  • Seit 2021: Mitglied des Executive Board der European Turbomachinery Society
  • 2021: ASME Dedicated Service Award
  • 2018-2020: Vorsteher des Executive Committee des ASME International Gas Turbine Institute (IGTI)
  • 2018-2021: Mitglied des Executive Committee des ASME International Gas Turbine Institute (IGTI)
  • 2018-2021: Mitglied des ASME Gas Turbine Segment (GTS) Leadership Team
  • 2019: "ASME IGTI Steam Turbine Committee Best Paper Award" für die Veröffentlichung GT2018-76388
  • Seit 2017: Associate Editor des ASME Journal of Engineering for Gas Turbines and Power
  • 2016-2022: Mitglied der AG Turbo-Programmleitung
  • 2017-2018: Mitglied des Conference Executive Committee der ASME IGTI Turbo Expo, Conference Chair der 2018 Turbo Expo in Oslo, Norwegen
  • 2015-2017: Vanguard Chair des ASME IGTI Steam Turbine Committee
  • Seit 05/2015: Vorsitzender des Beirats des Minerva Center "Micro Turbine Powered Energy Systems" der Max-Planck-Gesellschaft
  • 2017: "ASME IGTI Steam Turbine Committee Best Paper Award" für die Veröffentlichung GT2016-57598
  • Seit 12/2014: Member des Editorial Board des J. Power and Energy
  • 2014-2015: Mitglied des Conference Executive Committees der ASME IGTI Turbo Expo, Technical Programme Chair der 2015 Turbo Expo in Montreal, Kanada
  • 2015: "ASME IGTI Education Committee Best Paper Award" für die Veröffentlichung GT2014-27170
  • Seit 01/2014: Affiliated Professor KTH Royal Institute of Technology, Stockholm, Schweden
  • Seit 08/2013: Inhaber des Lehrstuhls Thermische Turbomaschinen der Universität Stuttgart und Direktor des Instituts für Thermische Strömungsmaschinen und Maschinenlaboratorium (ITSM)
  • 2012-2014: Vorsteher (Chair) des ASME IGTI Structures & Dynamics Committee
  • 2012: Visiting Scholar Duke University, NC, USA
  • 2012-2013: Associate Professor (Lektor) KTH Royal Institute of Technology, Stockholm, Schweden
  • 2011: Auszeichnung der Lehre mit dem "KTH Energy Technology Pedagogic Distinction Award"
  • 2010-2012: Co-Chair des ASME IGTI Structures & Dynamics Committee
  • 2010: "ASME IGTI Structures & Dynamics Best Paper Award" für die Veröffentlichung GT2009-59601
  • 2009: Dozent in Turbomaschinentechnologie, KTH Royal Institute of Technology, Stockholm, Schweden
  • 2006-2012: Assistant Professor KTH Royal Institute of Technology, Stockholm, Schweden
  • 2005: Promotion (PhD), KTH Royal Institute of Technology, Stockholm, Schweden, Doktorarbeit "Experimental Investigation of Three‐Dimensional Mechanisms in Low‐Pressure Turbine Flutter"
  • 1998: Dipl. Masch.-Ing. ETH Zürich, Schweiz, Auszeichnung der Diplomarbeit mit der ETH-Medaille
Zum Seitenanfang