Institut für Thermische
Strömungsmaschinen und
Maschinenlaboratorium
Pfaffenwaldring 6
70569 Stuttgart
Deutschland
 
Telefon:
Telefon +49 (0)711 / 685 - 63516
Telefax:
Fax +49 (0)711 / 685 - 69440
E-Mail:
Mail to E-Mail

 


 

Mitarbeiterdaten

Prof. Tekn. Dr.
Damian Vogt
Institutsdirektor

Dieses Bild zeigt  Damian Vogt
Telefon +49 (0)711 / 685 - 63516
Telefax
Raum1/19
E-Mail
Adresse
QR Code with contact data for  Damian Vogt
Download als VCard
Universität Stuttgart
ITSM - Institut für Thermische Strömungsmaschinen und Maschinenlaboratorium
Pfaffenwaldring 6
70569 Stuttgart
Deutschland

Fachgebiet:
  • Aeromechanik von Turbomaschinen (flutter, forced response)
  • Instationäre Strömungen in Turbomaschinen
  • Entwicklung von Versuchsständen zur gezielten Untersuchung von aeroelastischen Phänomenen inklusive Entwicklung von Messtechnik
  • Entwicklung von numerischen Modellen zur Berechnung der Schwingungsamplituden von Fluid-Struktur-gekoppelten Schwingungssystemen unter Berücksichtigung von Verstimmung
  • Entwicklung von pädagogischen Konzepten
Publikationen:
  • Müller, F., Schatz, M., Vogt, D.M., Rehnsch, A., Experimental Investigation of a Low Pressure Model Steam Turbine With Supporting Rib in Close Vicinity to the Last Stage Rotor Blades at Varying Operating Conditions, ASME Paper GT2016-57258, 2016
  • Starzmann, J., Hughes, F., White, A.J., Grübel, M., Vogt, D.M., Numerical Investigation of Boundary Layers in Wet Steam Nozzles, ASME Paper GT2016-57598, 2016
  • Fuhrer, C., Grübel, M., Petrie-Repar, P., Vogt, D.M., The Influence of Non-equilibrium Wet Steam Effects on the Aeroelastic Properties of a Turbine Blade Row, ASME Paper GT2016-57899, 2016
  • Gutierrez Salas, M., Bladh, R., Petrie-Repar, P., Vogt, D.M., Mårtensson, H., Fransson, T.H., Forced Response Analysis of a Mistuned Compressor Blisk Comparing Three Different Reduced Order Model Approaches, ASME Paper GT2016-57902, 2016
  • Vogt, D.M., Numerical and Experimental Study on the Influence of Damping Elements on the Flow and the Vibration Behavior of Industrial Steam Turbine Blades, keynote lecture given at the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), April 10-15, 2016, Honolulu, USA
  • Häfele, M., Traxinger, C., Schatz, M., Vogt, D.M., Drozdowski, R., Experimental and Numerical Investigation of the Flow in a LP Industrial Steam Turbine with Part-Span Connectors, J. Eng. Gas Turbines Power 138(7), 072604-072604, 2016
  • Drozdowski, R., Völker, L., Häfele, M., Vogt, D.M., Numerical and experimental analysis of low-pressure steam turbine blades coupled with lacing wire, J Power and Energy 230(3), pp. 332-342, 2016
  • Häfele, M., Traxinger, C., Grübel, M., Schatz, M., Vogt, D.M., Drozdowski, R., Numerical and Experimental Study on Aerodynamic Optimization of Part-Span Connectors in the last stage of a low-pressure industrial steam turbine, J. Power and Energy 229(5), pp. 465-476, 2015
  • Fuhrer, C., Vogt, D.M., Prediction of Flutter Stability of an Aeroelastically Unstable Linear Low-Pressure Turbine Cascade by Applying the Influence Coefficients Approach on Numerical Data, Paper presented at the 14th ISUAAAT Symposium, September 8-11, 2015, Stockholm, Sweden
  • Gezork, T., Gutierrez, M., Groth, P., Vogt, D.M., Fransson, T.H., Unsteady Blade Force Computation Sensitivity in a Transonic Turbine to Rotor Tip Gap, Hub and Shroud Cavity Modal Detail, Paper presented at the 14th ISUAAAT Symposium, September 8-11, 2015, Stockholm, Sweden
  • Petrie-Repar, P., Fuhrer, C., Grübel, M., Vogt, D.M., Two-Dimensional Steam Turbine Flutter Test Case, Paper presented at the 14th ISUAAAT Symposium, September 8-11, 2015, Stockholm, Sweden
  • Vogt, D.M., The Challenges of Steam Turbines in Industrial Applications, Panel lecture held at the 2015 ASME IGTI Turbo Expo Conference, June 15-19, 2015, Montreal, Canada
  • Thomas, R., Pradeep, A.M., Roy, B., Schatz, M., Kuschel, B., Schatz, M., Vogt, D., Influence of Tip Jet Mass Flow and Blowing Rate on the Performance of an Axial Diffuser at Different Inlet Total Pressure Profiles, ASME Paper GT2015-43427, 2015
  • Ilievski, M., Heidinger, F., Fuhrer, C., Vogt, D.M., Challand, S., Schatz, M., Experimental and Numerical Investigation of Partial Admission of a Radial Turbocharger Turbine for Improved Off-Design Performance, ASME Paper GT2015-43318, 2015
  • Häfele, M., Traxinger, C., Schatz, M., Vogt, D.M., Drozdowski, R., Experimental and Numerical Investigation of the Flow in a LP Industrial Steam Turbine with Part-Span Connectors, ASME Paper GT2015-42202, 2015
  • Drozdowski, R., Völker, L. Häfele, M., Vogt, D.M., Experimental and Numerical Investigation of the Nonlinear Vibrational Behavior of Steam Turbine Last Stage Blades with Friction Bolt Damping Elements, ASME Paper GT2015-42244, 2015
  • Bareiss, S., Vogt, D.M., Chebli, E., Investigation on the Impact of Circumferential Grooves on the Aerodynamic Centrifugal Compressor Performance, ASME Paper GT2015-42211, 2015
  • Drozdowski, R., Völker, L., Häfele, M., Vogt, D.M., Numerical and Experimental Analysis of LP Turbine Blades coupled with Lacing Wire, Paper No ETC2015-105 presented at the 11th European Conference on Turbomachinery, March 23-27, 2015, Madrid, Spain
  • Häfele, M., Traxinger, C., Schatz, M., Vogt, D.M., Drozdowski, R., Numerical and Experimental Study on the Aerodynamic Optimization of Part-Span Connectors in the Last Stage of an LP Industrial Steam Turbine, Paper No ETC2015-054 presented at the 11th European Conference on Turbomachinery, March 23-27, 2015, Madrid, Spain
  • Gutierrez, M., Gezork, T., Yang, S., Vogt, D.M., Fransson, T.H., Forced Response Analysis of a Transonic Turbine using a Free-Interface Component Mode Synthesis Method, Paper No ETC2015-227 presented at the 11th European Conference on Turbomachinery, March 23-27, 2015, Madrid, Spain
  • Brouwer (née Volker), S., Vogt, D.M., Simulation of a Flow in a Gas Turbine Exhaust Diffuser with Advanced Turbulence Models, Chapter in "High Performance Computing in Science and Engineering '14", W.E. Nagel, D.B. Kröner, M.M. Resch (Eds.), Springer, 2015
  • Monaco, L., Fransson, T., Vogt, D.M., Bergmans, J., Remotely Operated Aeroelastically Unstable LPT Cascade for Turbomachinery Aeromechanics Education and Training - Remote Flutter Lab, J. Eng. Gas Turbines Power 137(3), 032507-032514, 2014
  • Grübel, M., Starzmann, J., Schatz, M., Eberle, T., Vogt, D.M., Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 1: Numerical Validation of Wet Steam Models and Turbine Modeling, J. Eng. Gas Turbines Power 137(4), pp. 042602-042612, 2014
  • Schatz, M., Eberle, T., Starzmann, J., Grübel, M., Vogt, D.M., Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 2: Turbine Wetness Measurement and Comparison to CFD Predictions, J. Eng. Gas Turbines Power 137(4), pp. 042603-042601, 2014
  • Vogt, D.M., Forced-Response Predictions from Academic Point of View, Panel lecture held at the 2014 ASME IGTI Turbo Expo Conference, Dusseldorf, Germany, June 16-20, 2014
  • Grübel, M., Starzmann, J., Schatz, M., Eberle, T., Vogt, D.M., Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 1: Numerical Validation of Wet Steam Models and Turbine Modeling, ASME Paper GT2014-25244, 2014
  • Schatz, M., Eberle, T., Starzmann, J., Grübel, M., Vogt, D.M., Two-Phase Flow Modeling and Measurements in Low-Pressure Turbines Part 2: Turbine Wetness Measurement and Comparison to CFD Predictions, ASME Paper GT2014-25245, 2014
  • Häfele, M., Starzmann, J., Grübel, M., Schatz, M., Vogt, D.M., Numerical Investigation of the Impact of Part-Span Connectors on Aero-Thermodynamics in a Low Pressure Industrial Steam Turbine, ASME Paper GT2014-25177, 2014
  • Gezork, T., Fransson, T.H., Mayorca, M.A., Groth, P., Vogt, D.M., Influence of Tip Shroud Cavity Detailing on Turbine Blade Forcing Calculations, ASME Paper GT2014-26724, 2014
  • Monaco, L., Fransson, T., Vogt, D.M., Bergmans, J., Remotely Operated Aeroelastically Unstable LPT Cascade for Turbomachinery Aeromechanics Education and Training - Remote Flutter Lab, ASME Paper GT2014-27170, 2014
  • Dietmann, F., Vogt, D.M., Ölfreier CO2-Verdichter für Wärmepumpen, Paper presented at the Deutsche Kälte-Klimatagung, Hannover, Germany, November 21-22, 2013
  • Freund, O., Bartelt, M., Mittelbach, M., Montgomery, M., Vogt, D.M., Seume, J.R., Impact of the Flow of an Acoustic Excitation System for Aeroelastic Studies, ASME J. of Turbomachinery, 133, pp. 031033-031041, 2013
  • Mayorca, M., Vogt, D.M., Mårtensson, H., Fransson, T.H., Prediction of Turbomachinery Aeroelastic Behavior from a Set of Representative Modes, ASME J. of Turbomachinery, 135, pp. 011032-011042, 2013
  • Vogt, D.M., Fransson, T.H., Aeroelasticity of Turbomachines, Paper presented at the MUSAF II Colloquium, Toulouse, France, September 18-20, 2013
  • Vogt, D.M., Sensitivity of Aerodynamic Damping Values Determined from Unsteady Blade Surface Pressures Measurements, Paper presented at the 18th Blade Mechanics Seminar, Winterthur, Switzerland, September 11, 2013
  • Platzer, M.F., Lennie, M., Vogt, D.M., Analysis of the Conversion of Ocean Wind Power into Hydrogen, Paper presented at the World Renewable Energy Congress, Murdoch, Australia, July 14-18, 2013
  • Vogt, D.M., Fransson, T.H., Current Research on Turbomachinery Flutter within the EU Collaborative Research Project FUTURE, invited lecture at the 13th ISUAAAT Symposium, Tokyo, Japan, September 11-14, 2012
  • Vogt, D.M., Fransson, T.H., Towards Flutter-Free Turbomachinery Blades, Chapter in "Innovation for Sustainable Aviation in a Global Environment", D. Knörzer and J. Szodruch (Eds.), IOS Press, 2012
  • Mayorca M.A., Vogt D.M., Mårtensson H., Fransson T.H., A New Reduced Order Modeling for Stability and Forced Response Analysis of Aero-Coupled Blades Considering Various Mode Families, ASME J. of Turbomachinery,  34, pp. 051008 - 051017, 2012
  • Fruth, F., Vogt, D.M., Fransson, T.H., Harmonic Force Variation due to Change in  Blade Count Ratio - Physical Interpretation, Paper presented at the 13th ISUAAAT Symposium, Tokyo, Japan, September 11-14, 2012
  • Glodic, N., Vogt, D.M., Fransson, T.H., Influence of Tip Clearance Modeling in Predictions of Aeroelastic Response in an Oscillating LPT Cascade, Paper presented at the 13th ISUAAAT Symposium, Tokyo, Japan, September 11-14, 2012
  • Vogt, D.M., Fransson, T.H., Podcasting the Whiteboard - A New Way of Teaching Engineers, ASME Paper GT2012-70154, 2012
  • Sanz Luengo, A., Vogt, D.M., Schmitt, S., Fransson, T.H., Validation of a Linearized Navier-Stokes Based Flutter Prediction Tool - Part 2: Quantification of the Prediction Accuracy on a Turbine Test Case, ASME Paper GT2012-69682, 2012
  • Monaco, L., Vogt, D.M., Fransson, T.H., Implementation of a Remote Pump Laboratory Exercise in the Training of Engineering Students, ASME Paper GT2012-69983, 2012
  • Mayorca, M.A., Vogt, D.M., Fransson, T.H., Mårtensson, H., Andersson, C., Uncertainty of Forced Response Numerical Predictions of an Industrial Blisk - Comparison with Experiments, ASME Paper GT2012-69534, 2012
  • Freund, O., Bartelt, M., Seume, J.R., Mittelbach, M., Montgomery, M., Vogt, D., Impact of the Flow on an Acoustic Excitation System for Aeroelastic Studies, ASME Paper GT2012-69966, 2012
  • Vogt, D.M., Experimental Research on Aeroelasticity, VKI Lecture Series on “Structural Design of Aircraft Engines: Key Objectives and Techniques”, VKI LS RTO-AVT-VKI 207, Rhode-Saint-Genèse, Belgium, 2012
  • Monaco, L., Vogt, D.M., Fransson, T.H., A New Linear Cascade Test Facility for Use in Engineering Education, Paper presented at the 21st Symposium on Measuring Techniques in Turbomachinery, Valencia, Spain, March 22-23, 2012
  • Sanz Luengo, A., Vogt, D.M., Fransson, T.H., Resonances Influence in Recessed-Mounted Transducers Used for Unsteady Pressure Measurements, Paper presented at the 21st Symposium on Measuring Techniques in Turbomachinery, Valencia, Spain, March 22-23, 2012
  • Vogt, D.M., Turbomachinery Blade Vibrations - Meeting the Challenge, invited lecture at the 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, USA, February 27 - March 2, 2012
  • Vogt, D.M., Mårtensson, H.M., Bladh, R., TurboVib - A Swedish Research Initiative Addressing Turbomachinery Vibratory Phenomena, Paper presented at the 20th ISABE Conference in Gothenburg, Sweden, September 12-16, 2011
  • Mayorca, M.A., De Andrade, J.A., Vogt, D.M., Mårtensson, H., Fransson, T.H., Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage, ASME J. of Turbomachinery, 133, pp.021013 - 021013-10, 2011
  • Mayorca, M., Vogt, D.M.,. Mårtensson, H., Fransson, T.H., Prediction of Turbomachinery Aeroelastic Behavior From a Set of Representative Modes, ASME Paper GT2011-46690, 2011
  • Fruth, F., Vogt, D.M., Fransson, T.H., Influence of the Blade Count Ratio on Aerodynamic Forcing - Part II: High Pressure Transonic Turbine, ASME Paper GT2011-46071, 2011
  • Glodic, N., Vogt, D.M., Fransson, T.H., Experimental and Numerical Investigation of Mistuned Aerodynamic Influence Coefficients in an Oscillating LPT Cascade, ASME Paper GT2011-46283, 2011
  • Hosseini, S.M., Fruth, F., Vogt, D.M., Fransson, T.H., Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Turbine Stage, ASME Paper GT2011-45813, 2011
  • Vogt, D.M., Fransson, T.H., Turbomachinery Aeroelasticity Analyses - Everyday Business or Exceptional Challenge?, invited lecture at the 9th European Conference on Turbomachinery, Istanbul, Turkey, March 21-25, 2011
  • Mayorca, M.A., De Andrade, J.A., Vogt, D.M., Mårtensson, H., Fransson, T.H., Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage, ASME J. of Turbomachinery, 133, pp.021013 - 021013-10, 2010
  • Mayorca M.A., Vogt D.M., Mårtensson H., Fransson T.H., A New Reduced Order Modeling for Stability and Forced Response Analysis of Aero-Coupled Blades Considering Various Mode Families, ASME Paper GT2010-22745, 2010
  • Fruth, F., Vogt, D.M., Mårtensson, H., Mayorca, M.A., Fransson, T.H., Influence of the Blade Count Ratio on Aerodynamic Forcing - Part I: Highly Transonic Compressor, ASME Paper GT2010-22756, 2010
  • Yasa, T., Paniagua, G., Fridh, J., Vogt, D., Performance of a Nozzle Guide Vane in Subsonic and Transonic Regimes Tested in an Annular Sector, ASME Paper GT2010-22901, 2010
  • Mayorca M.A., Vogt D.M., Mårtensson H., Fransson T.H., Numerical Tool for Prediction of Aeromechanical Phenomena in Gas Turbines, Paper presented at the 19th ISABE Conference in Montreal, Canada, September 7-11, 2009
  • Vogt. D.M., Glodic, N., Fransson, T.H., The Effect of Unsteady Aerodynamic Asymmetric Perturbations on the Mode Shape Sensitivity of an Oscillating LPT Cascade, Paper presented at the 12th ISUAAAT Symposium in London, UK, September 1-4, 2009
  • Glodic, N., Bartelt, M., Vogt, D., Fransson, T., Aeroelastic Properties of Combined Mode Shapes in an Oscillating LPT Cascade, Paper presented at the 12th ISUAAAT Symposium in London, UK, September 1-4, 2009
  • Mayorca, M.A., De Andrade, J.A., Vogt, D.M., Mårtensson, H., Fransson, T.H., Effect of Scaling of Blade Row Sectors on the Prediction of Aerodynamic Forcing in a Highly-Loaded Transonic Compressor Stage, ASME Paper GT2009-59601, 2009
  • Vogt, D.M., Experimental Research on Aeroelasticity, VKI Lecture Series on “ Structural Design of Aircraft Engines: Key Objectives and Techniques”, VKI LS 2008-07, Sint Genesius Rode, 2008
  • Vogt, D.M., Fridh, J.E., Fransson, T.H., Characterization and First Application of a Thin-Film Electret Unsteady Pressure Measurement Technique, Paper presented at the 19th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Brussels, Belgium, 2008
  • Mårtensson, H., Gunnsteinsson, S.S., Vogt, D.M., Aeroelastic Properties of Closely Spaced Modes for a Highly Loaded Transonic Fan, ASME Paper GT2008-51046, 2008
  • Andrinopoulos, N., Vogt, D., Hu, J., Fransson, T.H., Design and Testing of a Vibrating Test Object for Investigating Fluid-Structure Interaction, ASME Paper GT2008-50740, 2008
  • Vogt, D.M., Fransson, T.H., Experimental Investigation of Mode Shape Sensitivity of an Oscillating LPT Cascade at Design and Off-Design Conditions, ASME J. of Engineering for Gas Turbines and Power, 129, pp.530-541, 2007
  • Vogt, D.M., Mårtensson, H.E., Fransson, T.H., Direct Calculation of Aerodynamic Influence Coefficients Using a Commercial CFD Solver, Paper presented at the 18th ISABE Conference in Beijing, September 2-7, 2007
  • Vogt, D.M., Mårtensson, H.E., Fransson, T.H., Experimental and Numerical Study of Unsteady Aerodynamics in an Oscillating Low-Pressure Turbine Cascade of Annular Sector Shape, Paper presented at the 11th ISUAAAT Symposium in Moscow, Russia, September 4-8, 2006
  • Vogt, D.M., Fransson, T.H., Experimental Investigation of Mode Shape Sensitivity of an Oscillating LPT Cascade at Design and Off-Design Conditions, ASME paper GT2006-91196, 2006
  • Vogt, D.M., Fridh, J., Fransson, T.H., Design and Construction of a New Modular Wind Tunnel System, Paper presented at the 18th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Thessaloniki, Greece, 2006
  • Vogt, D.M., Mårtensson, H.E., Fransson, T.H., Validation of a Three-Dimensional Flutter Prediction Tool, Paper presented at the NATO Symposium on Evaluation, Control and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles, Granada, Spain, 2005
  • Mårtensson, T.H., Vogt, D.M., Fransson, T.H., Assessment of a 3D Linear Flutter Prediction Tool using Sector Cascade Test Data, ASME Paper GT2005-68453, 2005
  • Vogt, D.M., Fransson, T.H.,  A Technique for Using Recessed-Mounted Pressure Transducers to Measure Unsteady Pressure, Paper presented at the 17th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Stockholm, Sweden, 2004
  • Vogt, D.M., Fransson, T.H., Effect of Blade Mode Shape on the Aeroelastic Stability of a LPT Cascade, Paper presented at the 9th National Turbine Engine High Cycle Fatigue (HCF) Conference, Pinehurst, North Carolina, USA, 2004
  • Fransson, T.H., Vogt, D.M., A New Facility for Investigating Flutter in Axial Flow Turbomachines, Paper presented at the 8th National Turbine Engine High Cycle Fatigue (HCF) Conference, Monterey, California, USA, 2003
  • Vogt, D.M., Fransson, T.H., A New Turbine Cascade for Aeromechanical Testing, Paper presented at the 16th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Cambridge, UK, 2002
  • Zangeneh, M., Vogt, D., Roduner, C., Improving a Vaned Diffuser for a Given Centrifugal Impeller by 3D Inverse Design, ASME Paper GT2002-30621, 2002
  • Saxer, A.P., Saxer-Felici, H.M., Vogt, D.M.A., Sell, M., Gyarmathy, G, A Feasibility Study for Performance Prediction of Circumferentially Compound Stage Model Turbines, AIAA J. of Propulsion and Power, 16, No. 4, 2000, pp.687-696, 2000
  • Vogt, D.M., Fransson, T.H., Aerodynamic Influence Coefficients on an Oscillating Turbine Blade in Three-Dimensional High Speed Flow, Paper presented at the 15th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines, Florence, Italy, 2000
Lehre:
  • Dozent der Lehrveranstaltung "Grundlagen der Thermischen Strömungsmaschinen"
  • Dozent der Lehrveranstaltung "Thermische Strömungsmaschinen"
  • Dozent der Lehrveranstaltung "Turbochargers"
Lebenslauf:
  • Seit 07/2015: Vanguard Chair des ASME IGTI Steam Turbine Committee
  • Seit 05/2015: Vorsitzender des Beirats des Minerva Center "Micro Turbine Powered Energy Systems" der Max-Planck-Gesellschaft
  • Seit 12/2014: Member des Editorial Board des J. Power and Energy
  • 2014-2015: Mitglied des Conference Executive Committees der ASME IGTI Turbo Expo, Technical Programme Chair
  • Seit 01/2014: Affiliated Professor KTH Royal Institute of Technology, Stockholm, Schweden
  • Seit 08/2013: Inhaber des Lehrstuhls Thermische Turbomaschinen der Universität Stuttgart und Direktor des Instituts für Thermische Strömungsmaschinen und Maschinenlaboratorium (ITSM)
  • 2012-2014: Vorsteher (Chair) des ASME IGTI Structures & Dynamics Committee
  • 2012: Visiting Scholar Duke University, NC, USA
  • 2012-2013: Associate Professor (Lektor) KTH Royal Institute of Technology, Stockholm, Schweden
  • 2011: Auszeichnung der Lehre mit dem "KTH Energy Technology Pedagogic Distinction Award"
  • 2010-2012: Co-Chair des ASME IGTI Structures & Dynamics Committee
  • 2010: Auszeichnung "ASME IGTI Best Paper Award" für Veröffentlichung GT2009-59601
  • 2009: Dozent in Turbomaschinentechnologie, KTH Royal Institute of Technology, Stockholm, Schweden
  • 2006-2012: Assistant Professor KTH Royal Institute of Technology, Stockholm, Schweden
  • 2005: Promotion (PhD), KTH Royal Institute of Technology, Stockholm, Schweden, Doktorarbeit "Experimental Investigation of Three‐Dimensional Mechanisms in Low‐Pressure Turbine Flutter"
  • 1998: Dipl. Masch.-Ing. ETH Zürich, Schweiz, Auszeichnung der Diplomarbeit mit der ETH-Medaille